The START International ZCM2200NM electronic tape dispenser with safety guard cutting head and three programmable tape lengths for protective film automatically cuts and advances predefined tape lengths, and is suitable for medium to high production of repetitive taping in industrial applications. The dispenser accepts tape rolls in widths from 0.28 to 2" (7 to 51 mm), with an outside roll diameter up to 7"/178 mm. Special non-marking rollers advance protective films, including thin polypropylene packing tape. Using the LED display panel, the operator can program 3 cut lengths of 1.2 to 39" (30 to 999 mm). Feed and cut can be set to automatically advance and cut the tape in consecutive order of the 3 programmed lengths. The photosensor detects if there is tape at the outlet for accurate and consistent feeds and cuts. When set to automatic mode, the sensor feeds and cuts the tape. The feed and cut can also be operated manually with a push button. Programmed lengths can be overridden for a custom cut, and then returned to the autofeed settings. Feed roller pressure can be adjusted for tape thickness. The guillotined cut provides a straight edge to the dispensed tape. Estimated blade life is 200,000 cuts, depending upon the type of tape material. Cut length tolerance is + or – 0.04"/1 mm. The safety guard protects the operator from the cutting mechanism by preventing the cutter from activating when objects such as fingers or tools are present. The 3-in-1 core holder allows a range of tape roll sizes to be mounted. The dispenser has a steel frame for durability and a cabinet made from flame-retardant, anti-static composite. The ZCM2200 tape dispenser operates on 117 VDC at 50/60 Hz. It is suitable for industrial uses such as manufacturing, assembly, and packaging.
|Roll Capacity, Maximum Outside Diameter||7"/178 mm|
|Roll Capacity, Core Size||1, 1.4, and 3" (25, 35, and 76 mm)|
|Tape Width Capacity||0.28 to 2" (7 to 51 mm)|
|Material Lengths Cut||1.2 to 39" (30 to 999 mm)|
|Cut Length Tolerance||0.04"/1 mm|
|Overall Size of Unit||6.2 x 5.4 x 9.8"/16 x 14 x 29 cm (H x W x D)|
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Tape dispensers hold and cut tape. They are used in manufacturing, assembly, and packaging. Tape guns are portable, hand-held tape dispensers that are useful for small jobs. Table-top dispensers allow an operator to tear off the tape and then bring it to the point of application. Manual table-top dispensers allow an operator to pull and tear any amount of tape, or to dispense a fixed amount of tape by use of a hand lever. Electronic dispensers may be actuated by the push of a button or by a sensor that detects when the previously cut length of tape has been removed. Most tape dispensers work with pressure-sensitive tapes, such as transparent office tape, packing tape, or strapping tape. Gummed tape dispensers, also known as water-activated tape dispensers, work with water-activated adhesive tape. These dispensers moisten each piece of tape as it is dispensed.
START International manufactures tape dispensers, label dispensers, and optical inspection tools. The company, founded in 1981, is headquartered in Addison, TX.
What's in the Box?
- ZCM2200NM electronic tape dispenser
- Power cord
- Electronic tape dispenser automatically advances and cuts protective film tape in medium to high production applications
- Cuts tape widths from 0.28 to 2" (7 to 51 mm), in lengths from 1.2 to 39" (30 to 999 mm)
- Length of cut can be programmed with LED display panel and dispensed in 3 different lengths
- Non-marking rollers advance the protective films
- Safety guard protects operator from cutting mechanism